Speed and performance

What changed with DDR5 (on-die ECC, PMIC, two subchannels)?

DDR5 changed a lot more than the speed. Each stick now splits its connection into two independent 32-bit subchannels, carries its own power chip (the PMIC), and has error correction built into every memory chip (on-die ECC). The subchannels do the most for performance, the PMIC mostly helps keep the power clean at high speeds, and on-die ECC is a safety net for the chips themselves that doesn't turn your RAM into ECC memory.

What actually changed from DDR4?

JEDEC, the group that writes memory standards, published the DDR5 standard (JESD79-5) in July 2020. Here are the main differences, taken from JEDEC's announcement and from Micron's and Kingston's technical write-ups:

DDR4 DDR5
Standard speeds 1600 to 3200 MT/s 4800 MT/s at launch, planned up to 8800
Standard voltage 1.2V 1.1V
Power regulation On the motherboard PMIC on each stick
Connection per stick One 64-bit channel Two independent 32-bit subchannels
Burst length 8 16
Banks per chip 16 (4 groups of 4) 32 (8 groups of 4)
Chip sizes 2 to 16Gb 8 to 64Gb
On-die ECC No Yes, in every chip

The three changes people ask about most are the subchannels, the PMIC and on-die ECC. Here's what each one does.

What are DDR5's two subchannels?

A DDR4 stick talks to the memory controller (the part of your CPU that runs the RAM) over a single 64-bit connection. DDR5 cuts that into two 32-bit halves that work independently. Each half takes its own commands, so the two can be busy with different requests at the same moment.

The split only works because DDR5 also doubled the burst length, the number of transfers the memory makes for each request, from 8 to 16. You can check the math. DDR4 sends 8 transfers of 64 bits, which is 512 bits or 64 bytes. DDR5 sends 16 transfers of 32 bits, which is the same 64 bytes from only half the stick. Micron points out that 64 bytes is a full cache line, the chunk of data a CPU normally asks for, so each subchannel can answer a complete request by itself.

More, narrower channels mean the CPU can keep more requests in flight, which matters most when lots of cores are hitting memory at once. Micron describes the effect on a server as "turning an 8-channel system as we know it today into a 16-channel system."

How much does it add up to? In Micron's simulations, DDR5 delivered about 1.36 times the usable bandwidth of DDR4 at the same 3200 MT/s, thanks to the new structure alone. At DDR5-4800 against DDR4-3200, the estimate rose to about 1.87 times. Those are Micron's own estimates for a server-style workload, not game benchmarks, but they show that the subchannels are doing real work beyond the higher clock speed.

Does that mean one DDR5 stick is dual channel?

No. This is the most common mix-up. One DDR5 stick is still 64 bits wide in total, exactly like one DDR4 stick; it's just divided differently. CPU-Z shows a single DDR5 stick as "2 x 32-bit," and two sticks in dual channel as "4 x 32-bit."

You still need two sticks, one per channel, to get dual channel on a desktop. See dual channel explained for how to install them.

What does the PMIC do?

On DDR4, the motherboard converted power from your PSU into the exact voltage the memory needed. DDR5 moves that job onto each stick. A small chip called the PMIC (power management integrated circuit) takes in a higher-voltage feed, which Kingston says is 5V on PC modules and 12V on server modules, and turns it into the voltages the memory chips and the stick's other chips run on.

The reason is signal quality. JEDEC says the on-stick regulator gives better voltage tolerance, and Kingston lists better power distribution, better signal integrity and less electrical noise. At DDR5 speeds, a steady voltage delivered right next to the chips makes it easier to run fast without errors.

What it means for you:

  • The voltage you set in the BIOS is made on the stick. When an XMP or EXPO profile raises the memory voltage to, say, 1.35V, the PMIC on each stick is what produces it.
  • Standard voltage dropped. DDR5 runs at 1.1V at stock, down from 1.2V on DDR4, which helps laptops most.
  • Day to day, you won't notice it. There's nothing to configure, and it doesn't change which kit you should buy.

If you overclock, see how to overclock DDR5 for safe voltage ranges.

What does on-die ECC do?

Every DDR5 chip has its own error correction. According to Micron, for every 128 bits of data the chip stores 8 extra check bits, enough to find and fix a single flipped bit when the data is read. The chips can also scrub themselves: work through their contents in the background, fix any single-bit errors they find, and write the corrected data back.

It's there because of density. DDR5 chips go up to 64Gb, against 16Gb for DDR4, and JEDEC says on-die ECC is one of the features that lets makers build DDR5 on newer, denser manufacturing processes. Kingston notes it matters more as chips get denser. Think of it as a way for memory makers to keep tiny cells reliable, not as an extra feature for you.

Is DDR5 ECC memory, then?

No. On-die ECC only protects data while it sits inside the chip. Kingston and MemTest86 both point out that it doesn't catch errors on the trip between the stick and the CPU. It also doesn't tell the rest of the system anything: MemTest86 calls it "completely invisible to the CPU and memory controller." Your PC never knows whether a correction happened.

Real ECC memory works differently. The memory controller adds check bits to the data, they travel with it, and the CPU checks them on the way back, fixes what it can and logs errors. On DDR5, ECC sticks have wider 40-bit subchannels (32 data bits plus 8 check bits), so they carry extra chips. They also need a CPU and motherboard that support ECC, such as many AM5 boards with Ryzen 7000 and 9000, or Intel workstation chipsets like W680 and W880.

For gaming, regular DDR5 is fine. ECC sticks make sense for work where a silent error would be costly.

What else changed?

A few smaller changes round out the list:

  • Speed. DDR5 launched at 4800 MT/s, 50% above DDR4's top standard speed of 3200, and Kingston says the standard is planned to reach 8800. Most kits you'll buy run faster than the stock speed through XMP or EXPO; see why DDR5-6000 is the sweet spot.
  • More banks. Banks are the sections inside a chip that can each have a row of data open. DDR5 doubled them to 32, in 8 groups, so the chip can juggle more work at once and stalls less often on back-to-back requests to the same bank.
  • Smarter refresh. Memory has to refresh its contents constantly. JEDEC added same-bank refresh, which lets some banks refresh while others keep serving data.
  • Bigger chips. Chips from 8Gb to 64Gb are what make larger sticks possible. See 48GB and 96GB kits.
  • Cleaner signals. DDR5's receivers use a technique called decision feedback equalization to clean up the incoming signal, which helps at high speeds.

Does any of this matter in games?

Indirectly. The subchannels and extra banks are part of why DDR5 delivers more bandwidth than DDR4, and that helps CPU-heavy games. But latency measured in nanoseconds is about the same as good DDR4, so the gain is smaller than the speed numbers suggest. See DDR4 vs DDR5 for the full comparison.

The PMIC and on-die ECC won't show up in your frame rate at all. When you shop, speed, timings and capacity still decide how a kit performs.

The short version

  • DDR5 splits each stick into two independent 32-bit subchannels, but one stick is still single channel. Buy two.
  • The PMIC on each stick makes the memory voltage, including the higher voltage XMP and EXPO apply.
  • On-die ECC fixes single-bit errors inside each chip, silently. It isn't ECC memory.
  • If you need real ECC, buy ECC sticks and check that your CPU and board support them.
  • None of these changes is something you set up or shop for. Speed, timings and capacity still matter most.

Sources