Compatibility and slots
How to upgrade laptop RAM (and how to tell if it's soldered)
You can upgrade a laptop's RAM only if it has SO-DIMM slots (or the newer LPCAMM2 module). Many thin laptops have their memory soldered to the board, and that can't be changed. The quickest check: if the specs say LPDDR4X, LPDDR5 or LPDDR5X, it's soldered. If they mention SO-DIMM slots, you can upgrade. Your laptop's service manual is the final word.
Soldered or upgradeable: how to tell
1. Look up your exact model's specs or service manual. Search the model number (on the sticker underneath, or in Settings → System → About) plus "service manual." As Microsoft's community moderators put it, the most reliable answer comes from the exact model's service manual, not from a general hardware tool. Look in the memory section:
| The specs say | What it means |
|---|---|
| "SO-DIMM," "2 x SO-DIMM slots," "1 x SO-DIMM" | Upgradeable |
| "LPCAMM2" | Upgradeable by replacing the module |
| "Onboard," "soldered," "integrated" | Not upgradeable |
| LPDDR4X, LPDDR5, LPDDR5X | Almost always soldered |
| "8GB onboard + 1 x SO-DIMM" | Partly upgradeable: you can use the one slot |
Acer's own guide sums it up: LPDDR memory is soldered in nearly all cases, while DDR4 or DDR5 in a laptop usually means SO-DIMM slots.
2. Check Task Manager as a hint. Open Task Manager (Ctrl + Shift + Esc) → Performance → Memory. "Slots used: 1 of 2" means a free slot. The "Form factor" line may say SO-DIMM or "Row of chips." But treat it as a hint only: PC Build Advisor warns that Task Manager is often wrong about laptop memory, and buyers have ordered RAM that didn't fit because of it.
3. Know the platform. Some chips make the answer simple. Intel's Lunar Lake processors (Core Ultra 200V) put the memory inside the processor package itself, in 16GB or 32GB, with no way to upgrade. Apple Silicon MacBooks are the same. Many thin-and-light laptops from every brand use soldered LPDDR5X for its speed and battery life.
Why do laptops solder RAM?
It's not only to stop upgrades. Soldered LPDDR5X runs faster and uses less power than slotted memory: Acer notes it typically runs at 7500 to 9600 MT/s, against about 5600 for DDR5 SO-DIMMs in mainstream laptops. It also takes less space, leaving room for a bigger battery. The trade is that you have to buy enough memory up front.
That's why the newer LPCAMM2 format exists: it brings LPDDR5X speeds in a removable module. See LPDDR5X, CAMM2 and LPCAMM2 explained.
What to buy for an SO-DIMM laptop
Match these exactly:
- Generation: DDR4 SO-DIMMs (260 pins) and DDR5 SO-DIMMs (262 pins) aren't interchangeable.
- Speed: buy the speed your laptop already runs (Task Manager shows it), or faster. Most laptops can't use XMP, so faster sticks run at the laptop's own speed, and that's fine.
- Capacity: check the maximum in the specs. Many recent laptops take 2x32GB, and plenty now take 2x48GB (96GB), sometimes after a BIOS update.
If one slot is free: add a stick that matches the existing one in size and speed. Two matched sticks run in dual channel, which can make a big difference, especially for integrated graphics. A 16GB stick next to an 8GB one works, but only part of it runs in dual channel.
If both slots are full: replace both with a matched pair, like 2x16GB or 2x32GB.
If there's one soldered bank plus one slot: match the slot's stick to the soldered amount (for example, 16GB soldered + 16GB stick) for the full dual-channel benefit.
How to install it
Every laptop is a little different, so look up a teardown or the service manual's "memory" section first. The general steps:
- Back up your files, shut down fully (not sleep), and unplug the charger.
- Remove the bottom panel. Undo the screws; some hide under rubber feet. Many panels are also clipped, so use a plastic pry tool or old card, starting at a corner, rather than a screwdriver.
- Disconnect the battery if the manual says to. Many do, and it prevents shorts.
- Release the old stick: push the two side clips outward; the stick pops up at an angle. Pull it out.
- Insert the new stick at about a 30-degree angle, notch lined up, pushing it fully into the slot. Then press it down flat until the clips snap over the edges.
- Reconnect the battery, replace the panel and screws.
The first boot
Laptops with new DDR5 often take a while to start the first time, sometimes a minute or more on a black screen, while they train the new memory. Leave it plugged in and let it finish. If it still won't boot after a few minutes, reseat the stick.
Once in Windows, check Task Manager → Performance → Memory shows the new total. If it's short, a stick isn't seated fully.
Is it worth it?
Usually, yes, if the laptop can take it:
- 8GB to 16GB is a big improvement for everyday use on Windows 11.
- 16GB to 32GB helps with heavy multitasking, gaming and creative work.
- Adding a second stick to a single-stick laptop often gives the most improvement per dollar, through dual channel.
If your laptop's RAM is soldered, the only fixes are closing memory-hungry apps or tabs, or choosing an upgradeable model next time.
The short version
- LPDDR in the specs means soldered. SO-DIMM or LPCAMM2 means upgradeable.
- Use the service manual to confirm. Task Manager's form factor is only a hint.
- Match DDR4 or DDR5, and buy at least the speed your laptop runs now.
- Fill an empty slot with a matching stick for dual channel.
- Expect a slow first boot after installing DDR5, then check the total in Task Manager.