Compatibility and slots
Mini PC RAM upgrades: SO-DIMM, LPDDR and CAMM2
Many mini PCs take ordinary laptop SO-DIMM sticks and are easy to upgrade, often to 64GB or 96GB. Others, including some of the fastest models, solder LPDDR5X memory to the board, and those can never be upgraded. It even varies within one brand, so check the exact model before buying, and if you're shopping, decide now whether you'll ever want more memory.
Two kinds of mini PC memory
| DDR5 SO-DIMM | Soldered LPDDR5X | |
|---|---|---|
| Upgradeable | Yes | No |
| Typical speed | 5600 MT/s | 7500 to 8000+ MT/s |
| Typical max | 64GB to 96GB (2 slots) | Whatever it shipped with |
| Best for | Flexibility, home servers, VMs | Integrated graphics, local AI, small size |
The choice isn't always "upgradeable good, soldered bad." Mini PCs lean hard on their integrated graphics, which use system RAM as video memory, so faster memory helps them. Mini PC Lab notes that the soldered LPDDR5X in Beelink's SER9 gives more bandwidth than most DDR5 SO-DIMM kits.
How do you know which one yours has?
- Look up the exact model. Spec pages say "SO-DIMM," "2 x DDR5 slots," or a maximum like "up to 96GB" when it's upgradeable. "LPDDR5X," "onboard," or a single fixed amount means soldered.
- Don't assume by brand. StarryHope found that Beelink's SER9 solders its RAM while its GTi14 Ultra uses SO-DIMM slots, and that soldering has spread from budget models into the $700 to $1,200 range. Mini PC Lab also notes that older Beelink SER5 and SER7 models are upgradeable while the SER9 line switched to soldered memory.
- Task Manager (Performance → Memory) shows "Slots used" when there are slots. If it shows nothing, the memory is likely soldered.
- Barebone versions that ship without RAM always have slots, since you supply the memory.
What to buy for an SO-DIMM mini PC
- DDR5 SO-DIMM for any recent model; DDR4 SO-DIMM for older ones. Desktop sticks won't fit.
- Speed: DDR5-5600 is the usual target. Mini PCs run memory at their own set speed and rarely offer XMP, so faster kits won't run faster. GeekChamp lists dual-channel DDR5-5600 for models like ASRock's 4X4 BOX-AI350 and Minisforum's AI X1.
- Two matched sticks. Mini PCs need both slots filled for dual channel, which matters even more here because of integrated graphics. See dual channel explained.
- Capacity: 2x16GB is plenty for an office or media PC. 2x32GB or 2x48GB makes sense for a home server, virtual machines or local AI. Several current models list 96GB (2x48GB) as their maximum.
The official maximum is sometimes conservative. ServeTheHome got a 2x48GB (96GB) kit running in an Acemagic mini PC, and owners report similar results elsewhere. But it isn't guaranteed, so check owner reports for your model before buying past the listed limit.
A BIOS update can help with 48GB sticks. A Beelink SER8 owner documented problems going to 2x48GB and posted the fix on Beelink's forum. If big sticks don't work at first, update the BIOS before giving up.
How to install it
Most mini PCs open from the bottom:
- Unplug it and remove the screws on the base (sometimes under rubber feet).
- Lift the base carefully. Some have a cable attached (often to a Wi-Fi antenna or a second drive bay). Don't yank it.
- The SO-DIMM slots sit flat, one stick above the other. Push the side clips outward and the top stick pops up at an angle.
- Insert the new stick at about 30 degrees, notch lined up, then press it down flat until the clips click.
- Reassemble and start it up. The first boot can take a minute or more while the new memory trains; let it finish.
- Check Task Manager shows the full amount and two slots used.
If it doesn't work after upgrading
- Won't boot or shows less memory: reseat both sticks, pressing each down until the clips lock.
- Only one stick detected: try each stick alone in the bottom slot to find a faulty stick or slot.
- Unstable with big sticks: update the BIOS, then reset it to defaults.
- Runs slower than the label: normal; mini PCs run memory at their own fixed speed.
What about CAMM2 in mini PCs?
The newer CAMM2 and LPCAMM2 formats, flat memory modules that screw onto the board, combine LPDDR5X-class speeds with the ability to swap the module later. So far they're mostly in business laptops and workstations, with mini PC adoption still rare. See LPDDR5X, CAMM2 and LPCAMM2 explained.
The integrated graphics setting
Mini PCs reserve part of system RAM as video memory for the integrated graphics. In the BIOS this is often called "UMA frame buffer size" or similar. With more RAM installed, you can raise it, which helps some games and local AI tools that check how much video memory is available. Leave enough for Windows and your apps; raising it on a 16GB system takes memory away from everything else.
Buying a mini PC in 2026?
With memory expensive this year, an upgradeable model can be the better buy: start with 16GB or 32GB and add more when prices ease. If you're buying for local AI or gaming on integrated graphics, a soldered LPDDR5X model can be faster, but buy all the memory you'll ever need on day one.
The short version
- Check the exact model: SO-DIMM slots can be upgraded, soldered LPDDR5X can't.
- Upgradeability varies even within one brand's lineup.
- Buy matched DDR5 SO-DIMM pairs, usually DDR5-5600. Faster won't run faster.
- Many mini PCs take 2x48GB (96GB); update the BIOS if big sticks give trouble.
- Soldered LPDDR5X is faster for integrated graphics and AI, but buy enough up front.