Buying RAM

How to pick RAM for a new build, step by step

For most new gaming builds, the right RAM is a single kit of two DDR5 sticks, 32GB in total, at DDR5-6000 with CL30 to CL36 timings. Before you buy, confirm your motherboard takes DDR5 desktop sticks, match the speed to your CPU, and check the kit fits under your cooler. The steps below walk through each decision in order.

Step 1: What type of memory does your motherboard take?

Start with the motherboard, not the RAM. Its spec page or manual tells you the memory type, the number of slots, the maximum capacity and the supported speeds.

  • AMD AM5 boards (for Ryzen 7000, 8000 and 9000) take DDR5 only.
  • Intel 600 and 700 series boards (for 12th, 13th and 14th gen Core) come in DDR4 and DDR5 versions. The two aren't interchangeable, so check which one you have. The model name often ends in "DDR4" or "D4" for the DDR4 version.
  • Intel 800 series boards (for Core Ultra 200S) take DDR5.

DDR4 and DDR5 sticks look similar but won't fit each other's slots. Tom's Hardware notes the notch sits in a different place, so you can't push the wrong type in by mistake. Desktop boards use full-size DIMMs. Laptop sticks (SO-DIMM) and server sticks (RDIMM) won't work, even when they're listed next to desktop RAM.

Step 2: How much RAM do you need?

Pick capacity next, because it decides which kits you're choosing between.

What you do Good target
Gaming, browsing, everyday use 32GB (2x16GB)
Tight budget gaming build 16GB (2x8GB), with an upgrade later
Gaming plus streaming or lots of browser tabs 32GB, or 48GB (2x24GB)
Video editing, 3D, virtual machines, local AI 64GB (2x32GB) or more

32GB is the comfortable target for a 2026 gaming PC. 16GB still runs most games, but you'll feel it in the heaviest ones and with apps open in the background. 64GB doesn't make games faster. Our guide on how much RAM you need for gaming has the details.

Step 3: Should you buy two sticks or four?

Two. Even if your board has four slots, buy your full capacity as one kit of two sticks.

DDR5 is much happier with one stick per memory channel. With four sticks, most current CPUs have to run the memory a lot slower than its rated speed, and boot times and stability often suffer too. If you need 64GB, buy 2x32GB rather than 4x16GB. The full explanation is in 2 sticks vs 4 sticks of DDR5.

Also, don't buy two separate kits and combine them. Sticks from the same kit are tested together. Two identical kits bought separately can still refuse to run at full speed together. See can you mix RAM.

Step 4: What speed should you buy for your CPU?

This is where AMD and Intel differ. "Official" speed is what the CPU maker guarantees with no tuning. Anything above it is run through an XMP or EXPO profile, which is technically an overclock but works on almost every modern board.

CPU Official DDR5 speed (two sticks) What to buy
Ryzen 7000 DDR5-5200 DDR5-6000
Ryzen 9000 DDR5-5600 DDR5-6000
Intel 12th gen DDR5-4800 DDR5-5600 to 6000
Intel 13th/14th gen DDR5-5600 DDR5-6000 to 6400
Intel Core Ultra 200S DDR5-6400 DDR5-6400; CUDIMM kits if you want to go higher

On Ryzen, DDR5-6000 is the speed to aim for, because it lets the memory controller run in step with the memory. Faster kits often end up slower in games. On Intel, faster kits help a little more, but 6000 to 6400 is where good value stops. Why DDR5-6000 is the sweet spot explains both.

Kingston points out one more wrinkle: the exact CPU model matters. Some lower-end or low-power chips support lower memory speeds than the platform's headline figure, so check your CPU's own spec page too.

Step 5: Which timings should you look for?

At DDR5-6000, CL30 is the premium option, CL32 is close behind, and CL36 is the budget pick. The real-world gap in games is small, usually a few percent at most, and often less with an X3D chip.

If CL30 costs much more, CL32 or CL36 is a sensible saving. You can see the full comparison in CL30 vs CL32 vs CL36.

Step 6: Does the kit need EXPO or XMP?

These are the saved profiles that tell your board to run the kit at its rated speed. XMP is Intel's format and EXPO is AMD's. Many kits now include both.

For a Ryzen build, a kit with EXPO is the safest choice. Tom's Hardware notes that AMD boards can usually read XMP profiles too, but results are less consistent. For Intel, any XMP kit is fine. Either way, the profile is off by default, so you'll need to switch it on in the BIOS. Our XMP vs EXPO guide shows how.

Step 7: Will it fit under your cooler?

Tall heatsinks and RGB light bars can hit big air coolers that hang over the memory slots. Check your cooler's maker for its RAM clearance figure, then compare it with the kit's height on its spec page. Low-profile kits exist for tight builds. If you're using an AIO liquid cooler, RAM height rarely matters.

Looks are a free choice. RGB kits aren't faster or slower than plain ones, but they usually cost a bit more.

Step 8: Do you need to check the QVL?

The QVL (qualified vendor list) is your motherboard maker's list of kits it has tested on that board. It's a useful tie-breaker, and Kingston recommends checking it along with the board manual. But it isn't a list of the only kits that work. Plenty of kits that aren't on it run fine.

Check it if you're buying a fast kit (above DDR5-6400), a large kit (2x48GB or 2x64GB), or a board you know is picky. For a normal 2x16GB DDR5-6000 kit, it matters much less.

Step 9: What should you do once it's installed?

  1. Use the right slots. With two sticks, that's almost always A2 and B2, the second and fourth slots from the CPU. Your manual will confirm it.
  2. Expect a slow first boot. DDR5 runs memory training the first time, and it can take a minute or more. Don't power off. See why DDR5 takes so long to boot.
  3. Turn on EXPO or XMP in the BIOS. Until you do, the RAM runs at a slower default speed.
  4. Check it in Windows. Task Manager should show the full capacity and the rated speed.
  5. Run a quick memory test like MemTest86 if anything seems unstable.

Can you save money on any of this?

Yes, on timings, brand and looks. Most kits use memory chips from Samsung, SK hynix or Micron, so a lesser-known brand with the same specs usually performs the same. Our price charts show which 32GB kits are below their usual price right now, linked from the home page. For more ways to cut the cost, see how to find a good RAM deal in a shortage.

The short version

  • Check your board's memory type first: AM5 and Intel 800 series are DDR5; Intel 600/700 boards can be either.
  • Buy one kit of two sticks. 32GB (2x16GB) suits most gaming builds.
  • DDR5-6000 for Ryzen 7000/9000; 6000 to 6400 for Intel.
  • CL30 to CL36 are all fine. Pay for CL30 only if the gap is small.
  • Check cooler clearance, turn on EXPO or XMP, and expect a slow first boot.

Sources